1,400 monthly searches
Limescale looks nasty and can affect how well your toilet works.
Felix’s simple method:
“Pour white vinegar around the toilet bowl and leave it overnight. For tougher stains, sprinkle baking soda on top to create a fizzing reaction. Scrub with a toilet brush afterward. For heavy buildup, gently use a pumice stone — but be careful not to scratch.”
Why Are These Problems So Common?
- Older Homes: Many UK houses have plumbing systems that are decades old, making leaks and blockages more likely.
- Hard Water: Most UK areas have hard water, which causes limescale buildup.
- DIY Repairs: Lots of people try to fix plumbing themselves, but mistakes can cause more issues.
Ready for a Bathroom Upgrade?
If you’re fed up with fixing the same problems, it might be time to update your bathroom. At Bathroom Focal Point, we have everything from toilets and taps to shower enclosures and accessories — all designed to make your bathroom look great and work perfectly.
Need advice? Our friendly team is ready to help you find the perfect solution.
Get in touch today or browse our blog for more handy bathroom tips!
How to Remove and Replace Silicone Sealant in Your Bathroom
Silicone sealant keeps your bathroom waterproof, but over time it can crack, change colour, or get mouldy. When that happens, you need to remove the old sealant and put on new sealant.
Felix Anderson, CEO at Bathroom Focal Point, shares easy steps to help you do it right.
When should you remove bathroom sealant?
Remove sealant if it’s cracked, mouldy, discoloured, or shrinking. Also remove it if you’re changing your bath or shower.
Felix says:
“Sealant usually lasts about five years, but moisture and use can make it wear out sooner. Fix it quickly to avoid water damage.”
What you’ll need:
- Sealant softener (optional)
- Sharp knife or blade
- Plastic scraper or sealant remover
- Bathroom cleaner and mould remover
- Cloth and scouring pad
- White spirit (for tough residue)
- Washing up liquid (to smooth new sealant)
- New silicone sealant
- Caulking gun
How to remove old sealant (5 steps):
-
Cut the edges
Carefully cut along the old sealant with a sharp knife. -
Soften the sealant (optional)
Apply softener if sealant is hard. Wait as per instructions. -
Scrape off the sealant
Use a plastic scraper to remove the old sealant gently. -
Remove residue
Use a scouring pad to clean leftover sticky bits. For tough spots, use white spirit on a cloth (ventilate well). -
Clean the surface
Wipe with cleaner and mould remover. Let it dry fully.
How to apply new sealant:
-
Clean and dry the area
Make sure the surface is clean and dry before applying. -
Apply the sealant
Use a caulking gun to apply an even line. Smooth it with a finger dipped in soapy water (half water, half washing up liquid). -
Let it dry
Sealant dries to touch in 30–60 minutes but needs about 24 hours to fully cure. Don’t use the bath or shower during this time.
Felix says:
“Proper drying is key for a strong, leak-free seal.”
